TabCN-29B Tablet Press
This machine is kind of automatic rotary machine for continuous tablet pressing. It is mainly used for the production of tablet in pharmaceutical industry.
Tablet Press TabCN-29B Pre-compression Type
This machine is kind of automatic rotary machine for continuous tablet pressing. It is mainly used for the production of tablet in pharmaceutical industry. It is also suitable for other industries such as chemical, foodstuff and electronics to press the granular material into tablets.
- This machine is a kind of automatic rotary machine for continuous tablet pressing.
- It is mainly used for the production of tablets in pharmaceutical industry. It is also suitable for other industries such as chemical, foodstuff and electronics to press granular material into tablets.
- It is applicable to power materials with the fineness being above 100 mesh, and granular raw materials with granules not to be more than 10%. However, it is not applicable to semi solids, wet granules, easily-damped powder or raw materials with a low melting point.
- Guarantees a higher output as high production levels can be achieved with a minimal amount of labor.
- Higher outputs save time and enable you to meet your large production demands.
- It reduces wastage of material.
- It allows independent control of both the weight and hardness of tablets.
Main application:This machine is a single-press/doule-press type, continuous automatic tablet press for pressing granular raw materials into tablets. It is mainly used in pharmaceutical industry and also the chemical, food, electronic, plastic and metallurgical industries.
The peripheral cover is fully-sealed and made of Auce stainless.easy to clean without dirty corner.
|Structure Of Rotary Table
The rotary table is a main component which consists of upper/lower bearings and main shaft.
|Structure Of Rail
The rail is cylinder cam and plane concaved wheel consisting of upper/lower rail，as well as The track of movement of upper/lower impact lever.
The filling adjustment unit is designed for adjusting the weight of tablets.
|Tablet-Thickness Adjustment Unit
This unit is designed for adjusting the thickness of tablet.
Feed unit consists of feeder，bucket rack，column，adjustable screw and bucket.
|Punch quantity (set)
|Max. tablet pressure (kN)
|80 (Pre-pressure 500 kg)
|Max. tablet diameter (mm)
|Max. tablet thickness (mm)
|Max. filling depth (mm)
|Max. production capacity (pc/h)
|Speed of turntable (r/min)
|Pitch diameter (mm)
|Diameter of middle punch (mm)
|Height of middle punch (mm)
|Diameter of upper and lower punch (mm)
|Length of upper and lower punch rod (mm)
|Main motor power (kW)
|Dimension (LWH) (mm)
HUADA Pharma Offers
Backed by our 25 years of experience in pharmaceutical engineering solutions, we design, manufacture and supply high quality pharmaceutical process and packaging equipment to the industry worldwide.